thread top ad

Collapse

Announcement

Collapse
No announcement yet.

820-00045 troubleshooting steps

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 820-00045 troubleshooting steps

    Liquid damaged 820-00045, looks nasty especially around ISL95530 BGA chip. I'm using an original charger with it. The issue is PPDCIN_G3H is only 5v not 14.5v so it's not generating PPBUS_G3H properly I believe. However, it looks like U4780 is the chip that tells the charger to step the voltage up?

    Please correct me if I'm looking at this wrong and where to go from here. I am using a new DC in jack and cable.
    Last edited by arghhh; 11-29-2016, 03:02 PM.

  • #2
    Where exactly are you measureing PPDCIN_G3H????

    Comment


    • #3
      F4700 10 char

      Comment


      • #4
        Remove F4700 and see if you get PPDCIN_G3H.....

        Comment


        • #5
          Still 5v 10 char

          Comment


          • #6
            Do you have a solid green / orange light on the charger ?

            Comment


            • #7
              lol.......

              12" retina guys

              Comment


              • #8
                Is there no light on the logic board where the D.C. In is at?

                Comment


                • #9
                  The system "talks" to the charger to enable the 15V output. If that does not work it will be stuck at 5V. The system should run off the 5V, 15V is only needed to fast charge the battery.

                  PP3V3_G3H present? It is generated by the 95530.

                  Comment


                  • #10
                    PP3V3_G3H is 1.529v. The LED next to the battery connector is dimly lit though.

                    Comment


                    • #11
                      PPBUS_G3H is 0v, 0.03v drop to ground. Probably short? Don't have a known good here to compare.

                      Comment


                      • #12
                        Yeah that's a short. U7100 still suspect or something around it.

                        Comment


                        • #13
                          Would that explain why PP3V3_G3H is so low? Also, what signals does the ISL look for in order to turn on the LED?

                          Comment


                          • #14
                            ISL does not turn the LED on, look at how D6900 is powered.
                            There is a short on PPBUS, first find out where it comes from

                            Comment


                            • #15
                              pp3v3r3v0_aon, which comes from the ISL, no?

                              Comment

                              thread bottom ad

                              Collapse
                              Working...
                              X