thread top ad

Collapse

Announcement

Collapse

READ BEFORE REGISTERING SO YOUR ACCOUNT WORKS

In order for your account to be activated INSTANTLY, your PayPal email MUST MATCH THE EMAIL YOU USE TO REGISTER YOUR ACCOUNT ON THIS FORUM!! If your PAYPAL email address differs from your FORUM email address, your account will have to be activated MANUALLY when a customer service agent gets around to it.

I realize this sucks, and I do apologize.
See more
See less

820-3437 vp0r, ppbus 8.44v

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 820-3437 vp0r, ppbus 8.44v

    Hi.

    Liquid damaged board.
    Did not power
    Repaired corrosion around Q8510, U1950.
    Now powers.

    ASD reports VP0R below low limit.

    Charger plugged PPBUS is 8.44V

    I unplugged the charger and ran ASD again and it's not reporting error but PPBUS is 7.7V

    What's going on here?
    Last edited by G.Beard; 12-07-2016, 09:27 PM.

  • #2
    Is this machine recognizing and charging the battery?

    Comment


    • #3
      Originally posted by dukefawks View Post
      Is this machine recognizing and charging the battery?
      Yeah it knows the charger is there and it runs off the battery.
      Stays powered with PPBUS at 7.7V which I have tested with 3 different meters. It's running fine but I really don't like to send it out like this.
      I did not think it could even turn on at this voltage but it does.... I can take a picture!

      Comment


      • #4
        You didn't answer my question. With PPBUS at 8.4 I bet the data bus from SMC is not ok. So again, does it recognize the battery in OSX?

        Comment


        • #5
          Yes, in OS X
          it knows the battery is there
          it knows the charger is there
          it charges the battery

          Comment


          • #6
            Check for corrosion around Q5500.

            Comment

            thread bottom ad

            Collapse
            Working...
            X