I've got this 820-3115 that she pressing the power button powers on then right off, but iff i hold the power button for 8 seconds says on and runs just fine.
Note: this machine did have a short to ground in the isl6259 and was replaced as well as some water damage around the smc area.
i also noticed that pp3v3_s4 is at 0.013v. not sure if this is the issue or not.
any ideas?
Note: this machine did have a short to ground in the isl6259 and was replaced as well as some water damage around the smc area.
i also noticed that pp3v3_s4 is at 0.013v. not sure if this is the issue or not.
any ideas?