thread top ad

Collapse

Announcement

Collapse

READ BEFORE REGISTERING SO YOUR ACCOUNT WORKS

In order for your account to be activated INSTANTLY, your PayPal email MUST MATCH THE EMAIL YOU USE TO REGISTER YOUR ACCOUNT ON THIS FORUM!! If your PAYPAL email address differs from your FORUM email address, your account will have to be activated MANUALLY when a customer service agent gets around to it.

I realize this sucks, and I do apologize.
See more
See less

[SOLVED] 820-3330 - Lines in the picture. (missing L9011)

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • [SOLVED] 820-3330 - Lines in the picture. (missing L9011)

    Hi Guys,

    I have an 820-3330 that had a blown backlight.

    Fixed that issue but now I have lines in the picture; kind of like only every second column of LEDs in the LCD is working.

    I have attached a photo but it doesn't show up very well.

    Just noticed the pointer is laggy too. When I change the bright the box on the screen takes a moment to come up.
    Last edited by larossmann; 03-08-2017, 12:08 AM.

  • #2
    have you try a known working display and new cable?.

    Last edited by Alan.L; 03-05-2017, 04:57 AM. Reason: Wrong suggested info. Mistaken for a dinosaur board.

    Comment


    • #3
      C7771 on a 3330 board?....

      Can,t really see anything on the picture, what I think I see is just moire from the camera?

      Is the problem in the LCD or in the backlight?

      Comment


      • #4
        Originally posted by Alan.L View Post
        have you try a known working display and new cable?. have you change C7771 Tantalum capacitor yet? if still occur try tapping u9600 mux ic hard.
        Should have mentioned I have tried a known working screen.


        dukefawks The backlight is working properly now. The problem is with the picture on the LCD. If you look closely at the writing on the image, you can see how it is only drawing every second column.


        (Open the image in a new tab so you can view it full size, it's easier to see the writing)
        Last edited by gcain; 03-05-2017, 12:46 AM.

        Comment


        • #5
          Whats with C7771, I haven't been able to find any info on it.

          The cap measures okay and seems good to me. Replace it still?

          Comment


          • #6
            C7771 reffers to MCP platform boards, like 820-2330; is not your case....

            Comment


            • #7
              Sorry, i thought he had 820-2330. Must be late and mistaken.

              Comment


              • #8
                Measure all LVDS lines on diode mode at the LCD connector.

                Comment


                • #9
                  Apologies for the delay.

                  1 - 0
                  2 - 509
                  3 - 509
                  4 - 262
                  5 - OL
                  6 - 460
                  7 - 460
                  8 - 520
                  9 - 520
                  10 - 0
                  11 - 520
                  12 - 520
                  13 - 0
                  14 - 0
                  15 - 520
                  16 - 0
                  17 - 520
                  18 - 520
                  19 - 0
                  20 - 0
                  21 - 519
                  22 - 0
                  23 - 520
                  24 - 449
                  25 - 0
                  26 - 520
                  27 - 521
                  28 - 0
                  29 - 0
                  30 - OL
                  31 - 556
                  32 - 564
                  33 - 563
                  34 - 535
                  35 - 535
                  36 - 566
                  37 - 566
                  38 - 527
                  39 - 527
                  40 - 527


                  So would pins 14, 20 & 29 are of concern?

                  Pin 29 is the only one I can see with a path to ground, through C7252---- Scratch that, I miss read the boardview. C7252 is above the TP is goes it.
                  Last edited by gcain; 03-07-2017, 07:46 PM.

                  Comment


                  • #10
                    Ha!

                    L9011 is missing.

                    Comment


                    • #11
                      Mark this as solved please.


                      I think when I (or someone, it came from another shop) removed the DC Board I clipped L9011 and knocked it off.

                      Comment

                      thread bottom ad

                      Collapse
                      Working...
                      X