thread top ad

Collapse

Announcement

Collapse

READ BEFORE REGISTERING SO YOUR ACCOUNT WORKS

In order for your account to be activated INSTANTLY, your PayPal email MUST MATCH THE EMAIL YOU USE TO REGISTER YOUR ACCOUNT ON THIS FORUM!! If your PAYPAL email address differs from your FORUM email address, your account will have to be activated MANUALLY when a customer service agent gets around to it.

I realize this sucks, and I do apologize.
See more
See less

820-2915 LCD_PWR_EN missing

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 820-2915 LCD_PWR_EN missing

    LCD_PWR_EN is missing and no short to ground. Board chime and mouse light. No video, no backlight. Nothing with flashlight

    Is that GPU problem? LVDS_DDC_CLK and LVDS_DDC_DATA present at 3.4V

  • #2
    Probabily with thisboard. Start with heating the GPU to about 100C.

    Any image ?

    Comment


    • #3
      I replaced the GPU and now no mouse light and no chime.

      I have noted Q7820 is damaged. But I am not sure how to check it as in boardview it is 4 pins. One pin left and 3 pins right and on board I see 6 pins chip. 3 pins up and 3 pins down.

      I can measure 3.33V and 3.0V that goes to GPU.
      Last edited by MDY; 07-04-2017, 05:26 AM.

      Comment


      • #4
        Why why why did you replace the GPU before confirming it was bad. Pull the GPU and see if the mouse light comes back, these boards should power on without a GPU installed. Q7820 must have been fine before all this mess as there was chime and mouse light......

        Comment

        thread bottom ad

        Collapse
        Working...
        X