Got an 820-3435 that says "Battery may not be charging properly"
No liquid damage. DCIN_G3H is at 16.5v, so that would probably be the culprit in my mind? TechTools & Coconut both detect and test out the battery as being fine, charging at a decent rate. Had a problem where it just would not turn on for a bit, then started turning on without issues.
I can order a new DC-IN board but could U7100 be pulling down DCIN_G3H to 16.5 and also keeping it from powering on?
No liquid damage. DCIN_G3H is at 16.5v, so that would probably be the culprit in my mind? TechTools & Coconut both detect and test out the battery as being fine, charging at a decent rate. Had a problem where it just would not turn on for a bit, then started turning on without issues.
I can order a new DC-IN board but could U7100 be pulling down DCIN_G3H to 16.5 and also keeping it from powering on?