[SOLVED]820 2530 going to sleep after the desktop is shown when starting the machine.

Status
Not open for further replies.

SoroS

Member
Hi,
I have a 820 2530 that goes to sleep right after it shows the desktop, the board came in for a keyboard connector replacement.
I've changed the connector and when i start the machine all goes fine until I see the desktop, after that the mac puts himself to sleep, removed the motherboard to inspect if it comes from the new connector and I see that the C9799 is ripped off sow I put a new one thinking that was the problem but it does the same thing like before.
Any suggestions on were to start looking?

Thank's
 

Attachments

  • photo279.jpg
    photo279.jpg
    34.4 KB · Views: 0

SoroS

Member
No Title

Thanks Louis,
I've searched where to measure the SMC_LID and seen on the schematics that J6955 has the SMC_LID_R on pin 5, no surprise when I see some pins are missing on batterry indicator connector.
Started the mac without connecting it and everything works.
 

Attachments

  • photo280.jpg
    photo280.jpg
    43.2 KB · Views: 0
Status
Not open for further replies.
Top