Hello there!
I have a dead touchbar , no signs of life, which as far as I could get is missing PM_SLP_S5_L.
No signs of liquid damage, board seems pretty neat.
All the power rails read OK for this stage, and I'm using a 820-00239 schematic and BV.
This comes out from U0500 and I've measured some inputs :
PM_SYSRST_L 3.35V
PM_RSMRST_L 3.35V
PCIE_WAKE_L 3.35V
SMC_WAKE_SCI_L 3.31V
PM_SLP_S5_L is not shorted, 0.5v diode mode.
What else is needed to get PM_SLP_S5_L , any ideas?
Any missing measurements or photos, let me know
Thanks!
I have a dead touchbar , no signs of life, which as far as I could get is missing PM_SLP_S5_L.
No signs of liquid damage, board seems pretty neat.
All the power rails read OK for this stage, and I'm using a 820-00239 schematic and BV.
This comes out from U0500 and I've measured some inputs :
PM_SYSRST_L 3.35V
PM_RSMRST_L 3.35V
PCIE_WAKE_L 3.35V
SMC_WAKE_SCI_L 3.31V
PM_SLP_S5_L is not shorted, 0.5v diode mode.
What else is needed to get PM_SLP_S5_L , any ideas?
Any missing measurements or photos, let me know
Thanks!