820-2850 kernel panic even after replacing C9560

Nick

New member
brand new cap. used an old cap from a ps3, tried a ceramic. same stuff. doesn't solve the kernel panic. what could it be?
 

Nick

New member
Asd crashes as soon as I load it. Kernel panic

vlnViBX.jpg
 

Nick

New member
gah it is an ignition type.. such bs

tried swapping bios from another machine i have but same old crap. it gives oanic on nvram now
TIOcrGh.jpg
 
Last edited:

Nick

New member
ok after a FIGHT against this machine here is what happened:

replaced the cap many times with different stuff..no change.

reflowed mux after removing edge bonding. machine worked fine for 15min. then dead. turned back on to:

FJl7OCC.jpg


reballed and worked fine.. for 30mins or so.. then it died again. completely. getting a quarter span left and right thing. repalced from a donor
V6itfTn.jpg


and so far no crashes... will test many more hours and see if the mux was the cause

ge5CPwu.jpg
 
Top