bjf
Member
After about two seconds I lose power. Very slight liquid-damage.
3V3_SUS goes to 0V.
PPVRTC_G3H stays stable at 3.3V.
PM_BATLOW_L is at 3.3V.
SMC_ADAPTER_EN is at 3.3V.
5V_S5 is at 5V
5V_S4 goes to 0V
PM_SLP_SUS_L goes to 0V
S5_PWRGD is at 3.3V
PM_DSW_PWRGD is at 3.4V
PCH_DSWVRMEN is at 3.2V
ALL_SYS_PWRGD goes to 0V.
No pulsing on any of these lines.
Not sure where to look next.
3V3_SUS goes to 0V.
PPVRTC_G3H stays stable at 3.3V.
PM_BATLOW_L is at 3.3V.
SMC_ADAPTER_EN is at 3.3V.
5V_S5 is at 5V
5V_S4 goes to 0V
PM_SLP_SUS_L goes to 0V
S5_PWRGD is at 3.3V
PM_DSW_PWRGD is at 3.4V
PCH_DSWVRMEN is at 3.2V
ALL_SYS_PWRGD goes to 0V.
No pulsing on any of these lines.
Not sure where to look next.