For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.
This unit is shutdown every 10 minuites and heat sink temperature when goes 66C then it shutdown.
I changes heatsink and fan, but no luck.Any idea what to do.No liquid damaged history.Thanks.
2informaticos : Not to derail the thread at all, but for general knowledge and future reference: what leads you to suspect the BIOS/ME is the issue in this case? Why would the ME region be related to a random-shutdown issue, without any additional information? Why not suspect bad RAM, faulty CPU/PCH, SMC, etc? I've seen many of these 00165 boards that have random-shutdown issues, all with no liquid damage or anything at all. Some last hours, some last a few minutes. Have tried BIOS (new dump and force-update/manual clean), as well as new SMC, reflow RAM (among other things) on many of them with no luck, so just curious as the reason you suspected BIOS right off the bat. Thanks!
I resolved 2 of them successfully; on both, the issue was with U7501/FETs. Replaced and boards continued to work fine. This did not work for several others; was hoping there would be some specific type of common fault, but it wasn't so. Also considered that many of these clean "random shutdown" boards might be manifesting symptoms that prelude the failure of one of the front tantalum caps that occurs on these every now and then. If not, I suspect they were all dropped at some point. None fail RAM tests, but maybe CPU damage. Anyway, just a thought.
Interesting--thanks. I knew RAM, bad CPU (after a few starts) would typically cause shutdown at similar intervals of time, so good to know BIOS/ME can have the same effect. Thanks!
"Usually suspect ME region when machine turns off at the same time..."
I meant always at same time; not alwaays 10 min, as in this case.
Turning off always at 5s, or 30 min for example.
I am trying to use the same HD but not boot up. I reinstall os on other good unit and back it to original unit but it is not boot up. Its hang after awhile. I tried different good SSD same issue.Any idea ??
Perform clean install of OSX using that exact board/drive and try again (or force update via bless/mount). Sounds like you still have ME region issues.
I uploaded original one and now it boot from usb osx but when tried to boot from original HD it shows stop sign. I did reformat/partition it with other mac and tried to load os from online but it shows stop sigh again.Any idea what should i do.