Hi guys, I have this 820-3332 that shuts off when I try to install a new OS (I'm doing it in an external ssd with usb adapter because internal doesn't work, I don't know if this is because ssd is faulty or because the board) I can boot from usb, and I can say "install" choosing the ssd, but when it starts to install with black screen and white apple logo, it shuts off.
I ran EFI ASD and one sensor readings is much higher than it should do. It says:
Location : IHSC
Type: Current
low-limit: 0.0 A
high-limit: 0.05A
description: Debug TBT T29 current
reading 0.825 (more or less, sometimes 0.832, sometimes 0,822...)
noise-tolerance: 1.0
So I supposed this sensor is the cause of kernel panics, but I can't find why it gives me that value. I have looked for any broken trace or something strange near UD250 but can't find anything.. What should I look? Thank you!
I ran EFI ASD and one sensor readings is much higher than it should do. It says:
Location : IHSC
Type: Current
low-limit: 0.0 A
high-limit: 0.05A
description: Debug TBT T29 current
reading 0.825 (more or less, sometimes 0.832, sometimes 0,822...)
noise-tolerance: 1.0
So I supposed this sensor is the cause of kernel panics, but I can't find why it gives me that value. I have looked for any broken trace or something strange near UD250 but can't find anything.. What should I look? Thank you!