No-Clean
Member
820-3023 CPU Temperature high after RAM repair, came in with 3 beeps at startup, we reballed the RAM chips and now works fine, but after a few minutes of use the fan starts to spin really fast.
When checking temperature the CPU cores are close to 100f
ASD fails with: ERROR --1 [Theta dh too high] Thermal Interface: TIM Test 75 percent GB (Test #4) Check that CPU heatsink is properly attached, using theta dh + 75 percent guard band.
Heatsink and paste are perfect.
Thanks!
When checking temperature the CPU cores are close to 100f
ASD fails with: ERROR --1 [Theta dh too high] Thermal Interface: TIM Test 75 percent GB (Test #4) Check that CPU heatsink is properly attached, using theta dh + 75 percent guard band.
Heatsink and paste are perfect.
Thanks!