thread top ad

Collapse

Announcement

Collapse

READ BEFORE REGISTERING SO YOUR ACCOUNT WORKS

In order for your account to be activated INSTANTLY, your PayPal email MUST MATCH THE EMAIL YOU USE TO REGISTER YOUR ACCOUNT ON THIS FORUM!! If your PAYPAL email address differs from your FORUM email address, your account will have to be activated MANUALLY when a customer service agent gets around to it.

I realize this sucks, and I do apologize.
See more
See less

820-00165 charging issue

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • BCN_Techs
    replied
    Thank you. Solved

    Leave a comment:


  • JohnB8812
    replied
    8.47 could be just a multimeter thing that's fairly close to 8.5. Mine always measures around 8.58 so not exactly 8.6

    Leave a comment:


  • BCN_Techs
    replied
    No, i mean now it is 8,4-8,5 and must be 8,6. So i gues that smc is running ( it was 8,2 before fixing) Computer is working fine right now.

    Leave a comment:


  • JohnB8812
    replied
    Yes very very important. 8.2 vs 8.6 on Airs and 12.2 vs 12.6 on Pros is the difference in the SMC not running vs the SMC running

    Leave a comment:


  • BCN_Techs
    replied
    Yes. It was bad soldered pins. Repaired traces again and now PPBUS is 8,47 and computer working fine. Is it important that 0,2V?

    Leave a comment:


  • JohnB8812
    replied
    Yeah do you get a light on the charger? Is the battery recognized in OSX? My guess would be same as 2informaticos possibly bad soldering on pins 11 of ISL or bad ISL. Also possible bad SMC but that is the last thing to check.

    Leave a comment:


  • 2informaticos
    replied
    Do you get orange light on Magsafe?
    Did you try known good battery?

    Post voltage and diode mode on SCL/SDA lines of battery bus.
    Be sure to have good solders and traces on pins 10/11 of U7100.

    Leave a comment:


  • BCN_Techs
    replied
    Yes with battery and without it's 8.2V

    Leave a comment:


  • JohnB8812
    replied
    Voltage on PPBUS charger only no battery is 8.2?

    Leave a comment:


  • BCN_Techs
    started a topic 820-00165 charging issue

    820-00165 charging issue

    Hi,

    Got 820-00165 with liquid damage on ISL625 area. It wasnt turning on. Changed ISL reconstructed some traces. Now it turns on, from powr adapter and battery but not charging. PPBUS is 8.20V that means that there is a problem with SMC but it is turning on.


    All rails except PPBUS are ok. Any idea?

thread bottom ad

Collapse
Working...
X