Hello it should be noted that I am noob,
This had liquid damage on the I/O board flex cable connector on logic board, first it would turn on no chyme with backlight on but no image.
Was unresponsive to NVRAM reset . it Performed SMC reset.
After using the Medusa 2 to clear PRAM and ME region it now turns on and chymes back light on but no image.
I have tested with known working screen.
Anyone had this before?
This had liquid damage on the I/O board flex cable connector on logic board, first it would turn on no chyme with backlight on but no image.
Was unresponsive to NVRAM reset . it Performed SMC reset.
After using the Medusa 2 to clear PRAM and ME region it now turns on and chymes back light on but no image.
I have tested with known working screen.
Anyone had this before?