Hi Im working on a board that has green light but no PP5V_S5_LDO. Am i correct in thinking u7501 pin 12 ~(P5VS5_EN) needs to be present for PP5V_S5_LDO to be on pin 29.?.
P5VS5_EN seems to be from SMC_PM_G2 presented on R8140 which reads 0v (100ohms), there does not seem to be a short on either side of this resistor (0.524 diode reading).
SMc issue or is my thinking wrong?.
SMC_RESET_L = 3.3v
ppbus_g3h = 12.6v
pp3v43 = 3.4v
ppvrtc_g3h = 3.4v
P5VS5_EN seems to be from SMC_PM_G2 presented on R8140 which reads 0v (100ohms), there does not seem to be a short on either side of this resistor (0.524 diode reading).
SMc issue or is my thinking wrong?.
SMC_RESET_L = 3.3v
ppbus_g3h = 12.6v
pp3v43 = 3.4v
ppvrtc_g3h = 3.4v
Last edited: