overshoot
Member
Hi,
I have that which had only a tiny liquid damage around R7521.
I have replaced the 4 resistors where the corrosion has formed and replaced also U7501.
Now the board gets voltages but is stuck at .2A
CPU_Vcore is present as well as PP1V05_S0. The PCH die gets warm but the CPU die is cold even though it's getting its 1.7V.
The only clue I have is that mem_reset_l is .1V which I guess is a bad value.
I am not getting the beeping sound for the RAM.
The U1950 area is good and all voltages are present including PM_PCH_SYS_PWROK.
Any idea where I could look?
I have that which had only a tiny liquid damage around R7521.
I have replaced the 4 resistors where the corrosion has formed and replaced also U7501.
Now the board gets voltages but is stuck at .2A
CPU_Vcore is present as well as PP1V05_S0. The PCH die gets warm but the CPU die is cold even though it's getting its 1.7V.
The only clue I have is that mem_reset_l is .1V which I guess is a bad value.
I am not getting the beeping sound for the RAM.
The U1950 area is good and all voltages are present including PM_PCH_SYS_PWROK.
Any idea where I could look?