[SOLVED] 820-00165 - No MagSafe Light (SMC_RESET_L issue)

bjf

Member
I have a liquid-damaged 820-00165 with no magsafe light. It has stable (but low) main G3H voltage at 8.19V. It looks like the SMC is off. Using known-good side board and cable.

• I have 3.42V going to the SMC.
• No PP3V3_S5.
• No SMC_CLK32K.
• PP1V2_S5_SMC_VDDC is at 1.17V
• SMC_EXTAL is at 1.3V.
• SMC_XTAL_R is at 0V.

Not sure what my next move should be.


**Probably no point in uploading the pics since the forum upload settings are killing the resolution but I put them up anyway in case it might help.
 

Attachments

  • photo689.jpg
    photo689.jpg
    6 KB · Views: 0
  • photo691.jpg
    photo691.jpg
    6.2 KB · Views: 0
  • photo690.jpg
    photo690.jpg
    5.5 KB · Views: 0
  • photo692.jpg
    photo692.jpg
    5.1 KB · Views: 0
Last edited by a moderator:

bjf

Member
I overlooked R5100. Blown. Functional board now. I don't run into a lot of non-powered SMCs for whatever reason so this one eluded me. Thanks for info.
 
Top