thread top ad

Collapse

Announcement

Collapse
No announcement yet.

Weller WXMP Tips

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • TexpertLLC
    commented on 's reply
    When doing U8900 resolder what solder iron/tip is recommended. Does using a chisel tip make the work easier?

  • TexpertLLC
    replied
    Thank you very much

    Leave a comment:


  • Sykulski
    replied
    I use the RT 1 when going small. It is 0.2 mm. But you can get a 0.1 mm. It is called RT 1NW which means it is non-wettable and thereby will not take solder.

    This brochure lists all available tips along with the order number that you can easily use for searching at Mouser or Farnell or other suppliers.

    https://www.soselectronic.cz/a_info/...0_Brochure.pdf

    Leave a comment:


  • TexpertLLC
    started a topic Weller WXMP Tips

    Weller WXMP Tips

    Can someone inform me on what is the smallest, most precise soldering tip for the Weller WXMP handpiece?

thread bottom ad

Collapse
Working...
X