StraightToThePoint
Member
820-00138
Board takes around 88-94 mah, and stays.
No liquid damage signs but it looks like its been ultrasoniced before.
Ive seen boards with no spi rom act sort of this way, so I measured U6100. Noticed immediately PP3v3_sus was shorted to ground and 0v, though nothing was getting warm, pch was normal, and 3v3_sus coming out and to of the pch was present, and 3v3_sus at u8130 was present as well.
My question is how should I go about fixing this? run a wire from u8130? where does 3v3_sus come from, to u6100?
by the way u6100 is removed and pin 8 is still shorted on the board.
Board takes around 88-94 mah, and stays.
No liquid damage signs but it looks like its been ultrasoniced before.
Ive seen boards with no spi rom act sort of this way, so I measured U6100. Noticed immediately PP3v3_sus was shorted to ground and 0v, though nothing was getting warm, pch was normal, and 3v3_sus coming out and to of the pch was present, and 3v3_sus at u8130 was present as well.
My question is how should I go about fixing this? run a wire from u8130? where does 3v3_sus come from, to u6100?
by the way u6100 is removed and pin 8 is still shorted on the board.