Hermann Neupert
Member
Hi, I receive a water damage board.
After cleaning the board and changing the trackpad flex. Fan spins at full speed.
I install hwmonitor and CPU 1, CPU 2 and memory proximity shows 129°.
U5800 area looks fine, no water near it. Traces to Q5810 and Q5860 have continuity. With webcam unplug same problem.
If I keep hwmonitor open, sometimes shows T° correctly for a couple of seconds, but even if sensor shows the right temperature fan keeps at full speed.
SMC area also don´t have water damage near.
Please tell me if I'm missing some test or if I should change U5800 or SMC?
Thanks
After cleaning the board and changing the trackpad flex. Fan spins at full speed.
I install hwmonitor and CPU 1, CPU 2 and memory proximity shows 129°.
U5800 area looks fine, no water near it. Traces to Q5810 and Q5860 have continuity. With webcam unplug same problem.
If I keep hwmonitor open, sometimes shows T° correctly for a couple of seconds, but even if sensor shows the right temperature fan keeps at full speed.
SMC area also don´t have water damage near.
Please tell me if I'm missing some test or if I should change U5800 or SMC?
Thanks