For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.
I would like to have some advice regarding the possibility of doing a swap of the processor and the NAND, is it possible to carry out the removal and installation of the M1 CPU without a BGA station, but with only the 861..
If possible, what temperature and speed do you recommend I use?
I have this MacBook that has these artifacts when turned on but it boots and the touchbar displays the choices I can't understand the lcd problem I tested it on another board and it works the only anomaly I found it on pp1v5r1v35_s0_gpu_mem that in diode mode 0.204 and on a working board it is...
Hello I have this machine stopped on the 5v 0.09A on the usb ports on the right and 20v 0.02A on the usb ports on the left, Also the voltages wrong at U7800 are unstable or they are in loop between 0V and the nominal value PPBUS 12.57
820-01041 with video problems turns on you can see the apple only a series of colored lines, I thought it was the typical problem of flex but I tried another good screen and it has the same suspicious defect a problem all gpu the tuch bar works and displays the keys, no external video
I have this card going on 20v but with 0.001A I discovered a short on pp3v3_s0_left lifting u8295, mo I can't find the component in short how many Volts should I use to find it ?
Hi, I have this machine where the internal video doesn't work, but I get the external video, I've already found myself in similar situations, and the damage seems to be a CPU data line.
I get EDP_PANEL_PWR_BUF_EN, EDP_PANEL_PWR_BUF_EN,
PP3V3_S0SW_LCD_R, DP_INT_HPD with their nominal value, the...
Hello solved the problem of Flexgate by replacing lcd, but it does not have backlight, here are some measurements:
PPVIN_S0SW_LCDBKLT_F = 13V
PPVIN_S0SW_LCDBKLT =12V
EDP_BKLT_EN= 0v
BUF_EDP_PANEL_PWR_EN= 3.40v
EDP_PANEL_PWR_EN= 3.10v
PANEL_P3V3_EN_DLY= 3.29v
I have this card that works perfectly the only thing that in the Monterey installation once you enter the password, it tells me that it can't install an update and doesn't keep me
Hi, I have this card that had a short on ppbus that I identified thanks to the Flir si C6505 the problem is that I do not have a replacement capacitor and wanting to recover it from a donor card there are only 22UF 6.3v or max 10v or 25v there are only polyester what do you recommend me to do?
I have this card that turns on emits the boot sound the lcd panel turns on but no image, illuminated black screen, where you can see some rejections, I tried to change lcd but the result is the same.
Hi I have this machine with the black screen, usb meter goes to 20v and reaches 1.56 A caps lock makes the green light the screen remains black, I tried an external monitor but nothing. How can I proceed?
Hi in this card I encountered a strange problem, as OS X audio output gives me the headphone jack alone, I don't understand what the problem is and where to start, I just did the pram reset
I have a problem with this card, it presents the classic problem of graphic artifacts due to ram, I reballed much of the ram but I just mitigated the problem after about half an hour of operation under stress, the artifacts reappear, how can I check the memories and figure out which one fails?
The board suffered liquid damage mainly on PPVOUT_SW_LCDBKLT, which corroded the tracks and also the pins of the lvds cable I replaced the lvds connector and used a 2010 model cable but on PPVOUT_SW_LCDBKLT I get 24 V only the led on the back but LCD does not display anything even the white...