Search results

Good day guys, have got an 820-00923 with a faulty Touch Bar strip , so I replaced it with a new one , and it works great, but the client brought it back that the Touch ID stopped working. I try to reconnect the cable just to be sure . but no changes, the option is not even present in system...

Hello guys have got an 820-01041-07 2018 15 inch with 55V on backlight output but has no backlight . I have tried with a know good screen , and a different screen cable but no changes , please help

hello guys , have got 820-00928 that's stuck on 5V. have got PP3V42 including PP3V3_UPC_XB_LDO, my SMC_RESET_L is high , all the i2c lines are high as well , I don't have a short to ground , the machine was not liquid damage . I have the PP1V8_UPC_XA_LDOD , I would like to know what else do I...

Have 820-00165 that would power up, and then go off in less than a minute , then comes back on again and stay on . Does not chime and does nor post. I vet cpu vcore. Please where do I go from here . Thanks in advance

Hello guys , have an. 820-3476 that would not display. The machine powers up fine and chimes too , but no image. when I power up the machine , just before it chimes I get 5V on L8300 but drops to 0V. EDP_BKLT_EN. LCD_PDR_EN, EDP_PANEL_PWR signals are all not present ... please help heys

Good day guys , have got an 820-3662 that initially was no power , however I found that it was missing PP3V3_S0 , I traced that to U8030 found it faulty and then replaced it , afterwards, the board powers on , but would neither chime no display , so I tested with another EFI chip just to be sure...

hello guys have a 820-00045 that would only charge in one direction but not the other way round.

Have got an 820-3535 ... was has a bit of liquid , however it?s been cleaned out . It works not but would occasionally restart by itself, have replaced the keyboard but it?s still restarts, and the time between its restarts varies

Have got a 2016 MacBook Pro Touch Bar with the following error and would not go past it 'A critical software update is required for your Mac. connect to a Network to install this update, your Mac can't be used until this update is installed. I have tried to install the update but always fails...

Hello guys, have got 820-00426 , the keyboard and trackpad works okay , however , when I connect them both , the machine would restart continuously, When I connect just the trackpad , it works , also when I connect just the keyboard it works , but both , the machine would constantly restart...

good day guys, please i need help with understanding this one.. HAVE GOT AN 820-3115 , WHRN I PLRESS THE POWER BUTON, THE MACHINE WILL POWER ON AND GO OFF IMMEDIATELY I LET GO OF THE POWER BUTTON, HOWEVER, WHEN I PRESS AND HOLD, IT POWERS UP , DOES THIS NOT POINT TO THE SMC ?

Hello guys ; So what?s the way around the 2018 individual separate screen codings . Does it mean one can only get a replacement through Apple. ? Swapping out the displays disable TRUE TONE ; and in turn less brightness even at full brightness adjustment

Please I need help here guys.. 820-00165 left USB not working , there?s power but no data. I have replaced the I/O BOARD AND CABLE , the right USB works fine?I also replaced D9510, D9511, D9520, and D9521 but still no changes , Any ideas please

Hello guys , please I need your help here ... the 2016 15 inch Touch Bar... has no sound , but the sound isn?t grayed out , replaced speakers no changes , I can adjust the volume but no output even from the headphones

hello guys , have got a MacBook pro 13 inch 2018 unresponsive touch bar . The touch bar would not respond, I then replace the top casing which includes the touch bar , but still does not respond to touch , though it lights up.. No liquid damage. was only swapping out the screen .

have got an 820-3332 that beeps 3 times. The 1.5V memory power rail is present ... I did s slight reflow of the RAM chips but still the same , do I need to replace all the ram chips or could it be the PCH? please help guys .. thanks in advance.

820-00165 MISSING PM_SLP_S4_L however when I trigger the on and off pad L7520 spikes to 5V , any ideas what that means or where I should look further ?

Hello guys , please I need your help, have got a MacBook Air 11inch whose keyboard/trackpad will only work in OS and the keyboard fan runs in full speed. HISTORY : initially the machine would intermittently switch off , so I had to replace the SMC and it works except the issue above, so I...

hello guys ... Please I need help on this one .. have got an 820-00165 that is missing PM_SLP_S4_L , however its not completely missing but sitting at 0.9V .... Other rails other than the S4 are present . any hint guys ?

GUYS, below is one of the work done we send out to clients after completing their jobs , please advice me on the format , and how I could make it better , Thank you so much Repair Summary For MacBook Air Liquid damage No Power This was a board level repair> During the course of our...