Therealkilometers
Member
Water damaged board. Main corrosion around U7100. Repaired U7100 Area and now have 8.6V on PPBUS_G3H. Pulls .02 amp on DC power supply.
PPBUS_G3H - 8.6v
PP5V_S5 - 5V
PP3v3_S5 - 3.3V
PP3v3_SUS - 0V
PPVRTC_G3H - 3.3V
RTC_RESET_L - 3.3V
SMC_RESET_L - 3.3V
PM_DSG_PWRGD -3.3V
I do have 32KHz Clock
No pulsing on either PM_SLP_S5_L or PM_SLP_S4_L when pulled in or SMC_ONOFF_L is shorted
PPBUS_G3H - 8.6v
PP5V_S5 - 5V
PP3v3_S5 - 3.3V
PP3v3_SUS - 0V
PPVRTC_G3H - 3.3V
RTC_RESET_L - 3.3V
SMC_RESET_L - 3.3V
PM_DSG_PWRGD -3.3V
I do have 32KHz Clock
No pulsing on either PM_SLP_S5_L or PM_SLP_S4_L when pulled in or SMC_ONOFF_L is shorted