-
For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.Subscribe Now
820-00165 no turning on..
- Thread starter yair37
- Start date
Do you mean pin 13?
Pin 1 is output; check diode mode to ground.
Do you get 3V3_S5?
Pin 1 is output; check diode mode to ground.
Do you get 3V3_S5?
Check if any big coil has the same 015 to ground.
What is exact PPBUS_G3H voltage (no battery)?
What was the problem of low resistance to ground?
Do you get 3V3_SUS?
What was the problem of low resistance to ground?
Do you get 3V3_SUS?
I'm pretty sure you don't have 8V there.
I asked about EXACT voltage; don't you have 3 digits voltmeter?
It is probably good, if you get 3V3_SUS, but PLEASE post accurate information.
Trigger SMC_ONOFF_L and check for drop pulse at PM_PWRBTN_L (at same time).
I asked about EXACT voltage; don't you have 3 digits voltmeter?
It is probably good, if you get 3V3_SUS, but PLEASE post accurate information.
Trigger SMC_ONOFF_L and check for drop pulse at PM_PWRBTN_L (at same time).
Check for pulse at PM_SLP_S4_L, at same time.
"PM_SLP_S4_L 0.4v no short"
Not sure what this means?
Can you detect a pulse there, when trigger SMC_ONOFF_L?
Not sure what this means?
Can you detect a pulse there, when trigger SMC_ONOFF_L?