very small water damage was on R8156, i replaced the resistor
before it was taking 0.1A on 16V now it take 0.02A which is normal but it wont start, i have green light on charger, 3.4V ok, i have 8.58V, 3.3V on L7560
u1950 was bit corroded, so i replaced it, and q8150 also, than u7501
same , i just takes 0.02A on 16V, green light ok
before it was taking 0.1A on 16V now it take 0.02A which is normal but it wont start, i have green light on charger, 3.4V ok, i have 8.58V, 3.3V on L7560
u1950 was bit corroded, so i replaced it, and q8150 also, than u7501
same , i just takes 0.02A on 16V, green light ok