Hello, got this machine it had water liquid spil on the keyboard. The board looks superclean, only one liquid indicator is a little red on the edge of the board, looks like not much hit the board. Even around the liquid indicator that was red all looks clean. I checked voltage, it actually turns on I get 19.5v and then the Amps move up for about 15 seconds from 1.4Amps to 1.55 and then drops to 0v, 19.5v still showing. CPU also gets hot, tried to boot from external drive, light up 15 seconds and then turns off. Any ideas what could cause this? Tomorrow will start measuring all voltages but if anyone has an indication where to look, that would be appreciated.