For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.
what duke was asking was resistance of PPBUS_G3H to those coils of those power supplies. If there is no low resistance from PPBUS_G3H to those coils, put 1 volt in with a DC power supply on PPBUS_G3H and slowly raise it until something gets warm.
Ok. I don't have a lab power supply. Looked at the old video with Louis where he uses a atx power supply and the led strips in the window. Started with 5 v, nothing. Tried 12 volt and still nothing burning. Checked with my fingers and with alcohol. Am I doing something wrong?