A1989 Display problem

Dozer

Member
Hi, I got this device with liquid damage.

Mainboard is cleaned and was not many liquid to see.

The display is not working. with another display the machine is working good.

The big connector looks pretty good.

I found that there is a burned backlight connector. So i soldered a nice connector on the flexcable and on the little mainboard.

The intresting is now for me that backlight is ok now but no apple or similar to see, obnly with a good display.

there was one pin, i am not shure if its soldered from the backlight flex cable connector.

can this connector cause a no picture fault?
 
Top