[SOLVED]820-00165 liqued damage

[Repairable]

(for my info so i know what board is what rep:1958)
Green/orange light
fan spin,
no chime
sometimes image and even os
most times it just stops running.

u1950 was prefucked. (replaced and trace fixed)

u8005/C8005 pp5v_so had some damage replaced
u5800 probe point for CPUTHMSNS_DUR_SEL fixed had some damage
PP3V3_S0 probe point above R202/R2021 damaged also repaired

rail volt diode
ppbus_g3h 8.59v
PPBUS_S5_HS_COMPUTING_ISNS 8.59v
PPDCIN_G3H_ISOL 18.91v
PP3V42_G3H 3.441v
PPVRTC_G3H 3.330v
PP5V_S5 5.01v
PP5V_S4RS3 0.000v 0.406
PP5V_S0 0.000v
PP3V3_S5 3.294v
PP3V3_S4 0.028v 0.344 (SMC FACING UP) measuring from smc to left i get 0.000v from SMC down and right i get 0.028 volt
PP3V3_S4_TBTAPWR 0.068v 0.432


turns on
after a few seconds turns off then also the mouse light turns off...

SMC_ONOFF_L 3.440 also when machine turns off , fans stops spinning and mouse light turns off

 

[dukefawks]

Pre fucked so it can be corrosion anywhere. Inspect closer, but it could be corrosion under any chip or corroded resistor trace. Check the usual suspects, U1900/50,U6100 termination resistors, TON resistors on CPU regulator, crap under SMC, etc.

 

[Repairable]

R6110 15.3​

R6111 15.2​

R6112 15.3​

R6113 15.2​

R6114 25.6​

R6115 15.4​

R6116 15.3​

R6117 15.4​

R6118 15.2​

R6119 15.3​

R6120 44.1​

R6121 43.5​

R6122 43.7​

R6123 25.4​

R​

R6125 43.6​

R6126 43.7​

R6127 44.1​

R6128 25.6​

R​

R6130 43.6​

R6131 44.0​

R6132 43.7​

R6133 44.0​

traces also all beep

found nothing yet...

UC here he comes

 

[Repairable]

solved smc replaced