What net is in the green circle? iP5S

Paul Daniels

Super Moderator
Smash damage has torn up the screw point BS2 on this 5S by J2.

I'm wondering what the flooded fill area is connected to in the picture, circled in green. Has no apparent connection that I can detect around the area, OL on diode mode. It has lifted off from the board down another layer and torn free of some inner vias.


  • photo1791.png
    1.5 MB · Views: 1
I could not help you, but have tried carefully both clean the flux and wick off excess solder then wet the area with bit of alcohol to see what looks like?

Remember you can have blind feed through too. PCB speak called vias.