thread top ad

Collapse

Announcement

Collapse

READ BEFORE REGISTERING SO YOUR ACCOUNT WORKS

In order for your account to be activated INSTANTLY, your PayPal email MUST MATCH THE EMAIL YOU USE TO REGISTER YOUR ACCOUNT ON THIS FORUM!! If your PAYPAL email address differs from your FORUM email address, your account will have to be activated MANUALLY when a customer service agent gets around to it.

I realize this sucks, and I do apologize.
See more
See less

[solved]PPBUS_G3H low voltage 820-2850 not charging fixed via Q7055

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • [solved]PPBUS_G3H low voltage 820-2850 not charging fixed via Q7055

    Hi Everybody

    820-2850 is working with charger , shows battery and charging but its too slow ( in 40Min. %2 charged). When i checked voltage see PPBUS_G3H is 11.8 volt but must be 12.8V. Louis wrote few times 1or 2 volts is missing on PPBUS_G3H its cause from SMC but i want to ask again any where can i check before SMC? ( I checked R7051,R7052 and R7005 its fine)



  • #2
    I guess is a bad battery try with a known good... What OS report about battery... "Replace Now", "Service Battery"??

    Comment


    • #3
      I tried known good battery nothing changed OS report condition normal for battery.

      Comment


      • #4
        Could be a bad Q7055, did you run ASD, does it reports some sensor issue??

        Comment


        • #5
          Classic Q7055 issue, replace.

          Comment


          • #6
            Thank you dukefawks ans aprendiz when i changed q7055 its working.

            Comment

            thread bottom ad

            Collapse
            Working...
            X