thread top ad

Collapse

Announcement

Collapse

READ BEFORE REGISTERING SO YOUR ACCOUNT WORKS

In order for your account to be activated INSTANTLY, your PayPal email MUST MATCH THE EMAIL YOU USE TO REGISTER YOUR ACCOUNT ON THIS FORUM!! If your PAYPAL email address differs from your FORUM email address, your account will have to be activated MANUALLY when a customer service agent gets around to it.

I realize this sucks, and I do apologize.
See more
See less

[SOLVED]820-3662-A orange light no boot?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • gadgetfix
    replied
    Originally posted by dukefawks View Post
    So is there a green and then orange light present now? PPBUS at 12.6V means SMC is running so make sure the magsafe board is good if there is no orange light.
    changed magsafe board now booting.
    thanks for your help

    Leave a comment:


  • dukefawks
    replied
    So is there a green and then orange light present now? PPBUS at 12.6V means SMC is running so make sure the magsafe board is good if there is no orange light.

    Leave a comment:


  • gadgetfix
    replied
    Originally posted by dukefawks View Post
    You using a REAL 85W charger to power this?
    Original charger. 85W.

    Leave a comment:


  • dukefawks
    replied
    You using a REAL 85W charger to power this?

    Leave a comment:


  • gadgetfix
    replied
    Originally posted by dukefawks View Post
    PPBUS voltage? 3V42 present?
    hey dukefawks thanks for your reply.

    ppbus_g3h has 12.67v
    pp3v42_g3h has 3.42v

    thank you for your help

    Leave a comment:


  • dukefawks
    replied
    PPBUS voltage? 3V42 present?

    Leave a comment:


  • gadgetfix
    replied
    actually my bad its green light.
    edit:even better no more light.
    Last edited by gadgetfix; 01-05-2018, 02:37 AM.

    Leave a comment:


  • gadgetfix
    started a topic [SOLVED]820-3662-A orange light no boot?

    [SOLVED]820-3662-A orange light no boot?

    Hey all,

    i got this MBP 15".

    History: had some milk spill. fortunately didnt go through keyboard. All WDI are intact and looks like it hasnt made any contact with the board except around battery connector.

    SO FAR: under inspection of microscope everything looks super clean except one cap next to battery which I replace from a different board. still no power. despite being so clean i still ran through the ultrasonic.

    Any suggestions?

thread bottom ad

Collapse
Working...
X