Recent content by Dusten04

I had the same case, same voltages. SMC_USBC_INT_L was present in my case however. SMC was the fault in my case

What max temps are showing? I clearly stated that sensors are showing normally. However, the temps showing, will vary if it’s idling, putting stress, etc Honestly, your advice in this form has gone downhill. You used to give solid advice, and unfortunately it has gone drastically downhill. I’m...

As clearly stated above - I have ruled out software.

yes

Alright, so I have an 820-00165 that the automatic fan control is not working properly. Board is spotless, with no liquid damage. Essentially, the fan stays around 1200RPM no matter what the temps are. The computer idles at normal temperature and the fan hangs around 1200 rpm. However, when...

Just update for anyone who cares if maybe their client will want to use the machine with a stone-dead battery like it was designed. The solution: SMC issue, Flashing T2 ROM, and DFU restoring fixed the issue.

“Is the test battery charging?” As I mentioned in my original post, test battery is charging at 4-4.5 amps. So yes, thats charging

The 01700 does boot with a 96 watt I have already done about 10 of these boards. So... There is definitely something wrong with the board

I am not going to lie to you, the title makes this sound easy, but I'm not thinking its that easy. 820-07100 Board History: Battery died, client wasn't able to charge. Does show the dead battery symbol when you plug it in. (I am using a known good OEM 96watt adapter) No liquid I unplugged...

Sorry forgot to mention that one. 3v3 im not sure what you mean by “oscillation”

820-3437 PM_SLP_S4_L, I am thinking dead CPU/PCH, but wanted a second opinion, or something else to check. Device History: Liquid damage near: SPI area J6100 U7400 U1950 U7501 I cleaned these areas, replaced what was obviously damaged (Several capacitors/resistors, U7501, U1950, removed J6100)...

Hello, I have a 820-00923 that is missing PM_SLP_S5_L. No liquid damage, client stated just died on him one day. I am thinking dead PCH, would like a second opinion, or something else to check before I call it. 20v at about 70mA Measurements: PPBUS: 13v1 PP5v_S5: 5v PP3v3_S5: 3v3 S5_PWRGD...

Device History: Unit came into shop, with backlight on, but no image. During initial inspection, the unit did not power on. Tech had to do SMC reset, for it to turn on. After that, the no image issue, was caused by the LVDS cable. Tech installed the cable, ran a diagnostic. Everything seemed to...

Thank you guys, it was Q7180

Board: 820-00165 Issue: Magsafe not turning on. No light on magsafe, putting out about 2v. Background: Initially came in for no power, liquid damaged around ISL area, as well as PPDCIN_G3H_ISOL area. Replaced ISL, cleaned up PPDCIN_G3H_ISOL area. Unit worked fine. Came back a week later...