Recent content by fbarcella

No Title Ok, was the wrong pin! Anyway I think that I cannot short to ground that pin, it's used. Right? [UPDATE] I've made it and all is wonderful working. I consider this thread SOLVED Thank you

No Title I've tried to install on it a WD Scorpio and the Pin11 is already grounded on that disk, but the fan is still flowing at maximum speed. I'm pretty sure, but I want to try, that there wasn't fan speed problem with Samsung EVO SSDs, don't know why

I will ban myself from this forum!! There was the cable misconnected!!

Ok, semi solved, After changed the fuse the screen wasn't light up at all, so changed the LCD cable seemed to works. (So the cable made a short I presume) Now the Mac is very slow and in ASD remain one error on Sensor Temperature TL0p - LCD Proximity (test 1) . have I a problem on LCD circuit...

No Title If I have identified right the components I assume that could be the fuse, right? The 3V measured could be a tension returning from other place? Thanks

If it's the fuse F4400 should I investigate why it's blowed before replace it, right?

Should I test with the display connected ? I find hard to identify the components without BV. I don't find 12 volt on 1-6 pin of J4400 but 3V and meanwhile a measure it go down

I will check better Could your confirm that there isn't board view for this board (on the internet)?

I can't see damage on the connector, changed motherboard and all went fine, (same display same cable), so the problem is definitely on board. I haven't modified the ssd but as I told you I can't see issues working with it, no high fan speed or slowness. Maybe I would get an error on temp sensor...

Have you found the board view for this board ? I could get only the schematics. Thnks

Hi, never used an hot air station? I want to start with fixing something, one day, motherboards I hope. Could someone suggest me on which kind of tools buy? I've seen the Louis video about WHA 900, and I cannot see the differences with WTHA1 (that in Italy cost 150-200€ less than WHA900, why?)...

No Title The posted image was from EFI ASD. But I don't know how to see the temperatures. In OS ASD I get more errors. But I don't know if these are useful or not.

Thanks, now seem that I have other problems to resolve first. But this item is not for my model. I can't find nowhere info about issue with thermal sensor replacing hdd for iMac Late 2013. On OWC site I see they doesn't use this inline thermal sensor for my model - see here...

No Title That was an image from internet, I don't have such cable, the internal 2,5" sata disk is connected only with SATA cable, for that I supposed that the temperature was read from S.M.A.R.T. Running ASD I got an error from SSD Temperature so I preferred to do what dukefawks told me and...

No Title Do you speak about this kind of connection?