Recent content by Greg

I know i should have checked external image but it completely slipped my mind i removed the charge port at the moment to use in another machine, Just wondering if anyone seen this before?

Got some weird anomalies on the screen with ghosting is this a display issue or logic board ?

Just an update, As i thought it didnt like my old monitor its weird though because it works with a A1706 and A1534. Purchased a newer USB C monitor and it is now displaying an image with that.

Louis is to busy to check these forums anymore lol. Just send it to him anyway.

Yeah will have to wait until i find one. Have you replaced many of these displays, is there any issue with the T2 chip?

Crack is minor , usually I see a lot more cracks to not see an image. cant explain why no external video though maybe it does not like my external display

Caps lock key lights up , track pad is activated and usb activity confirmed .

No signs of liquid damage. No signs of a drop looks like the crack was from something hitting the lcd its self. Not even a scratch on the body.

Purchased this A1932 with a broken screen The crack is minor seems like i should still get an image, back light does turn on. I disconnected the internal display and tried with an external display but cant get an image . I have tested this setup with a A1534 and the external display will work...

You were correct once again removed D6950 and values were the same. Replaced it and now detects the battery. Thanks Legend

Hi mate im not with the board now, but the R5281 and R5280 are the SCL/SDA SMC 5 SMBus lines aren't they(sorry dont have schematics with me atm either) R5281 pin 2 0.502 R5280 pin 2 0.450 Also sorry i miss typed i ment Pin 2 R5280 is 1.1v Will check the SMC 1 SMBus tomorrow.

Battery is good have tested with another board R5281 diode mode 0.502 R5280 0.450 Replaced u7000 still the same Pin 2 of R5261 stays around 1.1v Would this be SMC? reflow or new one?

I use one of those headlight polishing pads you put on a drill with some metal polish seems to be the fastest way, Will have to use a quality polish afterwards to reduce swirl marks. Only if the coating is really hard to get off i will use that method otherwise sometimes it just nearly falls off...

So i have had so many of these about 10 where the track pad gets super hot. Have you encountered this problem frequently? is there a common cap that shorts or something? or just bin them?