Recent content by javier_herart

PVCCIO_PHASE: 0.123V(compared to 0.076) PP5V_G3S: 0.387 (compared to 0.405) PVDD075GPU_PHASE: 0.032 (compared to 0.050) PVDDIOMEMGPU_PHASE1: 0.032 (compared to 0.048) PVDDIOMEMGPU_PHASE2: 0.032 (compared to 0.048) PPVDDCIMEM_GPU_R: 0.59V (compared to 0.089). All other measure almos same as...

Could I try to connect to ground Pin 11 of U8400?

How can I do that? Or measure that?

Do you have reference measures?

Can be issue with LID switch?

Replaced U8400/Q8401 and same issue. All resistor seem to be right.

Can I replace LP8548B1SQX06 with LP8548B1SQ_-03?

DFU Mode is returning 4014 error when reviving, (But yes, machine is recognized in DFU). I tried several times with different cables. Any help? Thanks

R8450: 0.1ohm (same value in both side in diode mode) R8451: 0.1ohm (same value in both side in diode mode) R8452: 1.29Kohm (diode: 0.384V on PP5V_G3S side, 0.536V on I2C_BKLT_SCL side) R8453: 1.3Kohm (diode: 0.384V on PP5V_G3S side, 0.536V on I2C_BKLT_SDA side) D8410(1): 0.568V D8410(2): 0.384V

Just tested with known good display: same issue. Any other idea? Thanks

No history available, no liquid damage. Yes, I do get image on the screen but no backlight. PP5V_S0SW_LCD: 5V PP3V3_S0SW_LCD: 3.3V DP_INT_HPD: 3.3V

Hello. No backlight on this machine: F8400: ok and no short LCDBKLT_EN_L: 12V PPVIN_S0SW_LCDBKLT_R: 12.58V LCDBKLT_EN_L: 12.58V (this is wrong right?) PP5V_G3S_BKLT_D: 5.1V PP5V_G3S_BKLT_A: 5.1V BKLT_EN_R: 3.3V Any help? Thanks!

SLPS2R: PP0V8_SLPS2R: 0.78V PP1V1_SLPS2R: 1.1V PP1V8_SLPS2R: 1.79V AWAKE: PP1V8_AWAKE: 1.8V PP3V3_AWAKE: 3.3V PVDDCPUAWAKE_SW0: 0.76V Coils around U7800 P0V9SLPDDR_SW1: 0.89v P0V9SLPDDR_SW0: 089V P1V1SLPS2R_SW0: 1.1V P1V1SLPS2R_SW1: 1.1V P1V8SLPS2R_SW0:1.8V PVCCPRIMCORE_SW1: 0V...

PPBUS_G3H: 12.58V PP3V3_G3H_RTC_X: 3.37V