Recent content by kashitozu

Hello, I have a computer that won't start due to oxidation, I changed the trackpad pad and the trackpad it started, but the client doesn't remember its code, we have to reset it. When I wanted to reset it, I pressed the on/off button to put it in recovery mode. It doesn't come back and it starts...

i replaced the nands that i took from a working a2159 motherboard and soldered them on, i put it in dfu mode and restored and at the end of the restore i have a padlock on the mac for apple configurator that appears but i have no display on the a2179.

I had another A1707 with no problems (we'll call it N ), I did some cross-testing My motherboard works on the new chassis (I have display ) N's motherboard works in the other chassis, but it took a while to display. My motherboard has no problem, I just need an original A1707 screen. For me, the...

Hello, i have a MacBook A2337 (820-02016A) i cant enter in dfu mode or in recovery nothing Is go in the OS but i dont have the password (and the customer too) i try dfu mode to restore with apple configurator but i cant enter and when i press the on/off button 10 second the mac just start dont...

exactly 0.10 milliamper i have say up the voltage on big coils i have : 5v L7670 3V L7690 12V L7030 0V L7400 0V L8410 0V L8100 0V L7210 0V L7220 0V L7230

the motherboard take 20v and go to 0.35mA and down to 0.10mA

what do u want to say when u say :Did you test the board alone on the desk

but i have no display is normal ?

i have change the nand now its recognized with Apple Configurator but i have that. i know its iCloud but how do I get it out of this mode

i have : 5v L7670 3V L7690 12V L7030 0V L7400 0V L8410 0V L8100 0V L7210 0V L7220 0V L7230 what else do you want me to test

Hello, At first the MacBook stayed on 5v I saw that the U3100 component with the thermal camera was heating up, so I replaced it, now it goes up to 20v but I have no display with the battery: at startup it rises to 0.80mA then stabilizes at 0.50mA Without the battery: on start-up it rises...

what voltage you need ? because i have try the nand voltage and its good

I compared everything and I have only the pin 36 “LPSR_EN_LB_L” that instead of having 0.470 I have 0.549

J9600 is good and no trace of oxidation and the customer said it just happened

I have an a1706 820-00239 can't find the hard drive, no trace of oxidation we go in to do the installation, hard drive not found we measured all the voltages around the nand I have the PP3v3_2v7_nand_VCC: 2.69V PP1v8_SSD_Cold: 1.8V PP00V9_SSDREG : 0.9V Do you think the problem is with the...