Recent content by Leroy

switch connected, bought a good cable at apple to be sure, but no change nothing happens

Okay never done that before. read the link and need to buy a switch and as I'm at it some wire. 2 questions: is the button I found right? and what size wire you recommend? https://nl.rs-online.com/web/p/tactile-switches/2707935

PPVDDCPU_AWAKE 0.755V PPVDDCPUSRAM_AWAKE 0.800 PP1V1_SLPS2R 1.099V PP1V8_SLPS2R 1.800V

I can understand that :) DFU mode not recognized. PPBUS_G3H with batt and usb-c 11.60V. PPBUS_G3H with usb-c power not stable 5.3-5.8-6.5V looping 3V3_G3H_RTC 3.284 3V3_G3H 3.286V (but only with usb and batt connected)

PP1V8_G3S 0.312 PP3V3_G3S 0.330 PP5V_G3S 0.400

PP1V8_G3S 0.000 PP3V3_G3S 0.000 PP5V_G3S 0.002

PP3V3_G3S_G3H_RIO 3.286 P5VG3S_DRVH 0.023 P5VG3S_EN 0.004 P5VG3S_EN_R 0.008 The rest of the very long list of G3S voltages is 0.000 to much trouble to proceed or do you still see life in this thing?

No. 0.000

No reaction indeed. PMU_ONOFF_L has a 3.284V and is stable

Well, the logic isn’t there yet. I can change the parts, but I don’t understand the technical part yet. That’s why I’m here and say whatever I think is usefull… Connected the cables. Nothing happened

Okay retry: with batt and power connected PPBUS_G3H 11.66V Only batt 11.66V PMU_ONOFF_L i tried to trigger with a tweezer. one end on the pin and the other on ground. No change Only with the batt i needed to connect the power cable shortly to get some voltage on the board. I also measured the...

Sorry, I need to take more time to read your answers, was about to leave when I got you're message. I left the power cable on. I'm away for a few days, will try it out when I'm back.

I don’t think so. No amp draw, no fan, no screen

11.9V on both. (the little light is on now also, before it wasn't. no amp draw on the amp meter)

its different and jumpy on each USB-c. 5.3V to 6.8V and the other one 5.7V drops to 4.0V and back