Recent content by machelper

Hi Duke Can u explain where is edit rom file? or replace with different bios(VGA bios) ? And did you tested real world repaired VGA board ( customer generally use for graphics works and 3D this machine) thanks for help

Hello Everybody Working on no video problem macbook pro 17" 2011 ( I know apple extended guaranty for video issue but no video is out off warranty rules) Machine turn power on I can here star dong sound Mac OS loading and i can up and down volume No video build in LCD and external display...

Thank you Duke I2C_ALS_SDA line is shorted ground in J3401 replaced connector and solved problem.

Hello everybody; I m working on A1278 2009 year. Fan noise and CPU usage %100 . When do ASD it shows TS0P unable read error. Tried; replaced track pad and cable replaced bluetooth and wifi cable with know good cable replaced SMC same status where can i check next step? thanks

Hello; When power on 820-3437-B 3 short beep error. ( Customer said 1 years ago liquid damaged and cleaned other service and works fine until suddenly stop) It sounds like memory error and looked for corrosion but cant see and measure ; PP1V2_S3 = 1.19V PP0V6_S0_DDRVTT = 0.6V where can i...

Hi again ; I tested board with know good 2015 LCD and cable also no backlight. When checked PPVOUT_S0_LCDBCKLT to ground resistance its 72ohm is it normal? İ think its too low Where can i check next step?

I dont have full case.. but i have 2015 13" LCD and old models LCD data cable its same problem no backlight :( Can i put DC to DC converter like this ( http://www.aliexpress.com/item/1pc-Module-4-75V-24V-to-0-92V-15V-DC-DC-Power-Supply-Buck-Converter-Step/32582253910.html ) and inject backlight...

When checked dataline pin 3 and 4 connecting to u7700 without problem.

Hi Duke, LCD pin 3 and 4 shows 5V; LCD pin 8 is 0v; EDP_BKLT_EN is 3.3V

Yes Duke. When i put the light behind lcd i can see image.

Hello everybody; I m working on 820-4924 (Retina 13" 2015) no backlight problem, No liquid damage or drop. Tried another known good LCD and data cable. - F7700 = ok and 12.5V - Replaced U7700 nothing change - BKLT_EN_R = 3.3V - PPVIN_S0W_LCDBKLT_R 12.5V ok - LCDBKLT_EN_L is 12.5V ( it must be...

When checked coils PP5V_S3 line is shorted ground. I found damaged C6213 shorted ground after replacement solved problem Thank you Duke

Hello Everybody Magsafe light is green and when battery charging orange but after hit power button orange turn green two second later turn orange not fan spin or anything. No liquid damage,no drop When measure PPBUS_G3H = 12.5V ( when hit power button its start to down until 2v, magsafe...

Yes 12.6v is stable , also removed fuse and injected 12.6 v directly nothing change

Hi everybody ; No corrosion and not dropped machine; When Push power button fan spins but no sound,no screen,not light on status led and power off and start it self again, if i remove memory,machine beeps and not turn off. Removed every cable,connectors and pull out board nothing changed. I'm...