MarcinRdm's latest activity

  • M
    MarcinRdm replied to the thread 820-00928 20v, 0a.
    100 ohms resistor helped. Is it good for SMC ?
  • M
    MarcinRdm replied to the thread 820-00928 20v, 0a.
    Is there a future risk if 3.3v is applied directly to PM_BATLOW_L ?
  • M
    MarcinRdm replied to the thread 820-00928 20v, 0a.
    I put in 1k and it's 1.8v. Unfortunately it still does not start. How best to do a reballing ?
  • M
    MarcinRdm replied to the thread 820-00928 20v, 0a.
    With both battery and charger connected is steady voltage 1.05v. Without batteries momentarily 3.3v on PM_BATLOW_L after a while 1.05v...
  • M
    MarcinRdm replied to the thread 820-00928 20v, 0a.
    yes, it does not start but is charging the batteries.
  • M
    MarcinRdm replied to the thread 820-00928 20v, 0a.
    Is there anything that can be done in this case ?
  • M
    MarcinRdm replied to the thread 820-00928 20v, 0a.
    Sorry, I meant the bypass all along. When I release the power button, windmills don't move . Momentarily 3.3v on PM_BATLOW_L.
  • M
    MarcinRdm replied to the thread 820-00928 20v, 0a.
    Now charging the battery. In my case, the fans did not spin. Maybe I'm doing a SMC reset wrong. I did this without a battery connected.
  • M
    MarcinRdm replied to the thread 820-00928 20v, 0a.
    I tried again. After the bypaaas it suddenly booted up and started charging. For a while. Now it's not booting up again.
  • M
    MarcinRdm replied to the thread 820-00928 20v, 0a.
    I tried . Does not charge the battery. SMC bypass without batteries - Holding down the power button the board Just stays at 5v until I...
  • M
    MarcinRdm replied to the thread 820-00928 20v, 0a.
    I use a original 96W charger. R1212 is 10K pin 1 - 1.05v, pin - 3.3v.
  • M
    No liquid damage, board in perfect condition. According to customer, this MacBook suddenly died on him. PPBUS_G3H 12.59v PP3V3_SUS =...
  • M
    MarcinRdm replied to the thread 820-3662-a.
    I tested on 3 different batteries. I noticed that PPBUS_G3H without battery has 12.56v and with about 11v. - on three different batteries
  • M
    MarcinRdm replied to the thread 820-3662-a.
    Yes or turns on with trackpad, but battery disconneted.
  • M
    MarcinRdm replied to the thread 820-3662-a.
    SMC bypass does not help. The battery is tested and operational. MacBook with battery loops startup sound. Only disconnecting the...
Top