Recent content by Mineccia15

Aon goes 12.35 to 12 to 0V in a loop 3V8_AON between 3.2/3.4V which secondary power supplies? Can't find any short

The resistor is 0 ohm. They have the same behavior, sorry

I have 2 test battery, don't know if they are charged. but does not seem to work. The reboot is instantly

Hello, got this MacBook for data recovery and was not water damaged. The usb-c amp switches to 20v and than reboots in a loop. Both the port have the same behaviour. Not able to but it in DFU. Kind of new model and don't know what to do or what to check. help please :)

R6851 present, U6850 not present on board

This stays just 0 all the time

??

TPAD_SPI_EN is present, 1.8V without trackpad. With trackpad connected it jumps 2 times from 0 to 0.3V ??

12 - 3.3 14 - 1.8 34 - 12.6 11 - 0 15 - 5 19 - 1.85

Good morning, I have an A2141 MacBook with trackpad just clicking and keyboard logically not working not water damaged. I found a black please inside the top let part of the trackpad connector. Replaced and also replaced trackpad, same issue. I replaced U8210 and U6860 without changes. All...

I noticed that screen was changed with a low quality one. Tested with original and the issue is gone. Can it be?

i fixed the issue with the UR300 installing the original one, so now screen acts normal again and I have just the issue of the trackpad and keyboard not working. Now both work in the alt menu, and not further in the booting or into the OS all the time. The lid sensor is not detecting the...

After changing 2 times all the cd3217, the issue was the U2890 board works :D

No error in diagnostic mode. if I try to boot from big Sur test external os at 2cm of loading bar fan spin high and restarts with the message your computer restarted because of a problem. Than boots fine into login Catalina installed on ssd.

Hello, I have a 16 inch MacBook Pro got it with bootloop at startup. At the first apple loading bar macbook was going off with high fan spin. I DFU restored with no issue and tried to install Sonoma. Downloaded with no issue and at less than half installation bar, the bootloop started. It...