Recent content by Puevig reven

RTC_CLK32K_XTALOUT is 14.6 Mohms RTC_CLK32K_XTALIN is 21.6 Mohms

thank you! RTC_CLK32K_XTALOUT 21.50k RTC_CLK32K_XTALIN 14.69k PP3V42_G3H 22.48k all kilo ohms

I am still a novice at this stuff this is the resistance readings I am getting: RTC_CLK32K_XTALOUT 21.50 RTC_CLK32K_XTALIN 14.69 PP3V42_G3H 22.48

Yes I am trying to turn it on by shorting the pads- and also I tried a keyboard too.

Red probe on ground and black on component in diode mode does not give me the resistance to ground??

I went ahead and measured resistance to ground on the following rails: PP3v42G3H_SW .299 PP3v42G3H_FB .681 PP3V42G3H_BOOST .596

I apologize Duke- but I am confused

I measured resistance to ground on RTC_CLK32K_XTALOUT and RTC_CLK32K_XTALIN and receive .829.

And I am getting .829 on both RTC Xtal rails

I get .298 on PP3V42_G3H

I have a 820-2879 with no water damage, has a green light but does not power on. All S5 power rails are present, but all S3 and S0 rails are missing. PM_SLP_S4_L is missing too and I believe this is what is responsible for enabling the S3 rails? Does U1400 create PM_SLP_S4_L on this machine or...

Duke where do you source the entire assembly from?

Hi Louis Where are you finding those prices? Everything I am seeing/purchasing is between 150-200.

Hi Duke, Thanks for the response. Does the EDID issue cause it to only boot into password recovery mode? And will an 2015 LCD only fix the issue or do I need an entire 2015 display?

I have a 13" 2015 Macbook Pro that the LCD assembly was replaced by another shop. It worked for 3-4 months and now came into us without producing a backlight on startup and it will only boot with backlight into password recovery mode? We replaced the entire board (820-4924) but the issue still...