Recent content by Pumemule

  1. P

    DFU Restore stuck on loading bar - 820-01700

    Hi, I got a2141 after water damage with short at the ssd area, C9580 was corroded and shorting. after replacing it the mac came on and i tried DFU , when trying to restore it stuck on loading bar with apple logo. so the DFU restore never had a success and after powering off and on it will go to...
  2. P

    A2141 CD3217 Replacement

    Hi, I got a2141 with two faulty cd3217, when connecting power to the right side the power show nothing , in the left side it show consuming . also the right side cd3217 getting got with connecting power to the left side, after checking with S-UEM2 it show "44" on this rails: UB300 - USBC_TA_CC2...
  3. P

    Nand Programmer A2141

    Hi all, As you know there is a wide dead nand with the a2141. i got a lot of scarps of a2141 and i'm tired of buying pre-programed aliexpress nands... i saw a lot of videos of the jcid p13 , but as i understood this is the old version, and there is jcid p15 that is the newer one. is jcid p15...
  4. P

    Stuck on DFU 820-01041 A1990

    No history, got it as not working. no water marks, or something visible. when power on the trackpad clicks but nothing else. Diode Mode: PP2V5_NAND_SSD0 - 0.36v PP0V9_SSD0 - 0.13v PP1V8_SSD0 - 0.37v SSD1 nothing because there isn't one
  5. P

    Stuck on DFU 820-01041 A1990

    Hi, i got a computer that came not powering on, tried to DFU, show error 53. Any idea what to look for? tried to rewrite the soc t2 chip, still the same. The apple screen stuck until power off by force.
  6. P

    A2141 - 820-01700 - DiskOnKey not working

    Thank you very much, happy to be here. Must say very fast replay! LB700 Got 5v. also want to add that charging working on all ports. the problem now that the mac recognize the DOK(on the right side ports) but show an error "usb accessory needs power". on the left side all good , only the right...
  7. P

    A2141 - 820-01700 - DiskOnKey not working

    Hi all, i got a a2141 that came to me with a problem that DOK'S don't work on the right side type c connectors , on the left side they works OK. found that CB709 was shorted, replaced it from a doner and now it power on the DOK but it show an error "usb accessory needs power". tried to replace...
Top