Recent content by Rajkumar

sharing one more case A1466 820-3437-B stuck on 0.005mAmp (no green or orange light) PPVBAT_G3H_CHGR_REG 8.19V is present L7095 3V42 is present 3v42 is also present on 4 RTC PM_BATLOW_L NO VOLT ON THIS LINE 3V3_SUS NO VOLT ON THIS LINE SMC_ADAPTER_EN no volt on...

i does't had 85W charger & the charger which i got from customer was repaired, replaced magsafe 2 cable by 60W.... but i have a 85W magsafe 1 charger & from your reference i adjust this cable in this MAC finally fan spins:) the best thing i have learned in this case, the importance of Same watt...

i am using magsafe 2 cable, sharing an image for reference

i have one question if we are using DCPS at 18.10-3.3Amp,for this also we need 85W magsafe cable?

PCH_DSWVRMEN 3.1v IS PRESENT PM_BATLOW_L NO VOLT ON THIS LINE SMC_ADAPTER_EN 3.39V AVAILABLE

YES

yes have 85W Magsafe Charger but right now using DCPS at 18.10V-3.5Amp for testing 3.42V is present on PM_DSW_PWRGD

3V3_SUS NO VOLT ON THIS LINE

PPBUS_G3H 12.59V is present 3V3_S5 is also present

hello guys macbook A1398 board no 820-3332 only orange light appears , found some corrosion near U6200 pin 1&2 DCPS stuck on 015mAmp SMC_BC_ACOK 3.42 IS PRESENT ANY SUGGESTION