Recent content by RedDemonic

  1. R

    820-2330 - 820-2532 Macbook Pro 15's A1281 battery

    cheers. yeah, i've notice the charging speed is slow. i bought two brands to try out. SLODA doesnt have sensor issue and charges quick. Runpower does have sensor issue and charges slowly.
  2. R

    820-2330 - 820-2532 Macbook Pro 15's A1281 battery

    since you cant buy new genuine apple battery and you have no other option but to buy the compatible battery. is it ok to ignore battery temp test in ASD, will it get slow performances because is a sensor thing?
  3. R

    [SOLVED]820-3437 - turns on but slow, Faulty sensor (PC0R)

    does osx save sleep state to bios? i've just shutdown within osx, plug magsafe and it no longer turn on its own. job done. cheers :)
  4. R

    [SOLVED]820-3437 - turns on but slow, Faulty sensor (PC0R)

    no, i hold the power button to turn it off.
  5. R

    [SOLVED]820-3437 - turns on but slow, Faulty sensor (PC0R)

    i've reflowed the SMC and (PC0R) have PASSED in ASD :) Was kinda knew it was SMC but need to confirm with you before i do sometime like this.. The laptop still turn on every-time i plug in the magsafe with a fully charged battery connected any idea and even without a trackpad flex connected?
  6. R

    [SOLVED]820-3437 - turns on but slow, Faulty sensor (PC0R)

    R5455 ------------------- pin2 = 1.513v pin1 = 0.132v The corrosion was on pin2 of U5110 - this was replaced which i've stated on the 1st post. just compared with a known working board = R5455 ------------------- pin2 = 0.130v pin1 = 0.129v
  7. R

    2914 GPU replaced, Chime on repeat, no image, fan normal

    i've repaired a mac mini that does a chime loop after the Bios ROM got corrupted. maybe try look into that?
  8. R

    [SOLVED]820-3437 - turns on but slow, Faulty sensor (PC0R)

    checked traces from U5450 to R5450, all good. i even have replaced both, just to be sure. any more ideas? dead cpu? --------------------------------- one thing i've just notice.. when i put back into the case. connect all cables and battery. It will turn on automatically every-time when i...
  9. R

    [SOLVED]820-3437 - turns on but slow, Faulty sensor (PC0R)

    R5450 is ok R5455 is ok R5451 is ok U5450 is ok. has 8.58v on pin4,5. 3.3v on pin3 R54301, U5430 are non-stuff. pin3 has 3.3v
  10. R

    [SOLVED]820-3437 - turns on but slow, Faulty sensor (PC0R)

    Seen page 41 before. IC0R and PC0R is same thing?
  11. R

    [SOLVED]820-3437 - turns on but slow, Faulty sensor (PC0R)

    not sure where to look on the schematic. i've found corrosion on pin2 of U5110 - replaced i've found corrosion on pin8,9 of u8005. - replaced maybe i have a dead smc?
  12. R

    820-3115 - liquid damaged - fan spin, no chime

    got it to chrime after replacing the SMC. I will check rest of the board and will report back.
  13. R

    820-5509-A - Mac Mini 2014, with corrupted SPI Rom.

    ok, i took it apart and reassemble again, then did a PRAM reset. it seems to did the job and no more auto turn on. i then run ASD, no error found. so its a success?
Top