Recent content by StinkoPachinko

Look no worries perhaps it's a language barrier and not ego. But you could have taken another approach to correct me instead of "use your common sense". Common sense told me that pin 1 for U4401 beeped when I touched pin 21 on J4402. Then took my measurements. But the measurements I provided...

Imagine paying $30.00 and explicitly announcing this is my first repair to only be helped by an absolute prick. Pad 20 has been burnt up ... I did a trace repair and connected it to pad 21 which then they shared 2.3. I have removed the trace and pad repair but instead of reconnecting it for a...

My apologies, here are some measurements. Thank you for helping me thus far. J4402: 20=2.3 22=0.46 J4401: 15=0.57 17=0.57 R4480: 2.3 R4481: 2.3 R4485: 2.3 CC704: 0.57 C4401: 0.57 CC706: 0.57 CC705: 0.57 C4471: 0.57 U4404: 1=0.57 R4491: 0.49 R3918: 0.57 R3917: 0.57 R3916: 0.57...

Thank you! There is continuity in between J4402 and U4404. When you say check all lines you mean trace all of PP1V8_S0SW_DFR correct?

Hello, I have started undergoing my first ever MacBook logic board repair. I am having an issue in which one pad (PP1V8_S0SW_DFR) on this "J4402" connector is reading 2.3 in diode mode. Where I believe it should be reading around 0.56 (Donor board reference). I had to do two trace and pad...