For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.
Ok, I will try U1200 first and then if that fails I will try a CPU after.
It is worth it because MLB is 64GB ram 2TB SSD. When I have an exact CPU available I will try and report back here with the results. For now I set it aside waiting for the perfect donor.
I have only done CPU replacements...
Prior to asking for help on here, I already DFU restored the machine fully.
I did try PRAM as well.
Issue persists. I know it's a hardware failure somewhere on the Logic Board, but that is all I know.
This MacBook came from another shop. They said it was showing black screen but when plug in external that the internal video shows. The internal video only shows in OS if you start the machine with the external monitor already plugged in. Once the external is unplugged the internal video goes...
Hi all,
I have no idea were to start with this MLB. The issue is, the MacBook will boot to OS and show internal display and external only with external monitor connected. Once the external monitor is unplugged the internal LCD goes out. Basically the MacBook can be used normally if an external...
I'm pretty sure the CPU was already damaged before, which is why I injected 8V. It was the last resort besides replacing the CPU. Now the CPU is removed. SO what your saying is even though the short is gone right now, when I solder on a known GOOD CPU, PPBUS_HS_CPU will have a short there again...
2informaticos, why do you ask? PM me if you really wanna know.
Thank you piernov, I will order some and see how it turns out.
Does anyone else know of any good edge glue for BGA chips?
I have been meaning to attempt this repair, I have a 13" lined up ready to get new flex cables + PCB board soldered on. Have you tried JUST replacing the cables and re-using the original PCB?
I need to clarify about this repair, when I first started working on it the first thing I did was rule out everything on PPBUS_HS_CPU that could be causing the short besides removing the CPU. Then I injected 8V. I figured that rail was supposed to be around 12V so I started low. That's when the...
Thanks. I suspected the CPU to be DEAD since U7410 is shorted.
If I have the skill to remove the CPU and replace it with a known good one just for learning do you think it has a chance?