Recent content by Zeruo

  1. Z

    Mid 2018 A1989 very small amount of water damage

    https://www.arrow.com/en/products/rcwk030610l0fmea/vishay Will this work ?
  2. Z

    Mid 2018 A1989 very small amount of water damage

    Where am I able to get a new one ?
  3. Z

    Mid 2018 A1989 very small amount of water damage

    The resistance of R7020 is 60 ohm
  4. Z

    Mid 2018 A1989 very small amount of water damage

    I have just noticed this ... R7020 looks damaged
  5. Z

    Mid 2018 A1989 very small amount of water damage

    I have checked all of them and the only one that has voltage is L7030 = 10Volts the rest have 0 volts. kind regards
  6. Z

    Mid 2018 A1989 very small amount of water damage

    Ah ok.. will take me a while.. I'll let you know tomorrow
  7. Z

    Mid 2018 A1989 very small amount of water damage

    L7600 has 5.5 volts and L7660 has 3.3 volts to ground
  8. Z

    Mid 2018 A1989 very small amount of water damage

    I have gone through all of PPBUS_G3H and cant see any short on it. Been through them all on resistance mode. They are all 10+ at 200k setting. F7000 has no short R7020 has no short
  9. Z

    Mid 2018 A1989 very small amount of water damage

    I didn't realise that I needed the charger plugged in .... PPBUS-G3H is 12.5 volts to ground.
  10. Z

    Mid 2018 A1989 very small amount of water damage

    R7020 is 20V to ground .. kind regards
  11. Z

    Mid 2018 A1989 very small amount of water damage

    Hi PPBUS_G3H seems to be 0.203 V to ground
  12. Z

    Mid 2018 A1989 very small amount of water damage

    I have the boardview schematic now I can see where ppbus_g3h is. Do I need to measure the voltage? If so how do I do that I have discord as well if you wanted to add me... Dan H#3836
  13. Z

    Mid 2018 A1989 very small amount of water damage

    Hey how do I do that? I have a multi-meter .. what setting do I need to use
Top