Search results

hi guys, a1286 restarts when selected shutdown . what area i should be looking into. kindly advise thanks

hi , i think it does the 3 times on and off but i will confirm it tomorrow , also will check the usb mouse thanks

hi guys , macbook air board looks clean . it powers on but no display , the cpu is getting extremely hot . no chime . voltages present on coils . any idea ?

hi , sorry had been away so did not respond earlier , it turned out to be the ezp 2013 not being compatible . i used the xeltek and it worked out fine . i was programming the bios because macbook air was getting stuck on the loading bar so i thought may be corrupted bios . Still have not...

hi philip , thanks for the information , Actually i have tried this already but the programmer always gave error message "detect chip error" . now closely looking on the bios ic the chip is 25q064a . this does not come up even in manual search on the programmer . i am now...

hi philip, i agree with you but the issue i have is that i have taken off the chip but that does not fit on to the adapters which generally come with the programmers . so i need to find the exact adapter and what is it called so i can purchase that and program the chip...

hi guys, i have got ezp bios programmer and i am successfully able to program bios chip on a1278 and a1286 models. i would like to find out about the adapter socket required to read the bios chips from models such as a1466 and so on . thanks

hi guys, liquid damaged board , faulty q7510 found so replaced and now green light is present , all the rails present until PP1V5_S3 , so pp 1v5_s3 missing checked and found MEMVTT_EN missing . PLT_RESET_L is missing kindly advise thanks

hi , any update on battery supply as i am looking for the same thanks

thanks for the reply , yes i am changing the cable . :)

hi , i have got a 2012 a1286 , 820-3330-b board and it was liquid damaged , screen cable and connector both damaged , As no 2012 screen connector (silver styled) is available anywhere in uk. so now planning to replace the connector with the older type(golden) connector rather than...

hi, you can also try using adhesive industrial strength glue b-7000 , we have used it on many ipads , without worrying about any tape . just fill it in with the glue . easily removable when its dry aswell , do check it out.

hi guys, need your advise here . this imac cpu fan is running high. so far steps taken are 1. reset pram 2. reset smc 3. removed rtc battery and tried 4. checked the lcd sensor cable 5. checked the hdisk sensor cable ( hd fan running fine) 6. optical fan running fine aswell...

hi , yes so far so good , also it is best to start from less amount as we dont want to damage boards , also i think if it is 10 ml to 1 litre then 50 ml to 5 litre and i have put over 100 ml , one thing i remember was to wait hours for it to warm up to 65 degrees ( the smell was...

hi soros, 5 litre distilled water with 103 ml of es132 , wanted to heat it to 65 degree's so had to wait hours but now i have ordered a water heater . it cleaned out pretty well .

hi , cp500d taking tooooooooo long to heat up to the desired temperature , quite strong smell of es132 , whoever uses it should have good ventilation , no idea what sort of harm they do to the skin . if any one has info please do share .

hi guys, thanks for the reply , just finished fixing the traces of q5300 and now it is completely working fine , thanks both of you for advice we can now put this thread as solved

ok , will update you tomorrow after changing it thanks

hi guys, liquid damage machine , cleaned and replaced isl twice , checked with few batteries but no luck. the problem is that it works fine when charger is plugged in but if charger is not plugged in it becomes slow and jerky , but as soon as the charger is plugged in it becomes completely fine...

hi , guys any update on the above issue , as i have got few machines with the same problem ( tried the bios and batteries already )